Product Description

Canine Adenovirus Antigen (CAV Ag) Test Kit is used to rapidly detect canine adenovirus (CAV AG) antigen in canine nasal secretions.

Product Detail

Canine Adenovirus Antigen (CAV Ag) Test Kit

Canine Adenovirus Antigen (CAV Ag) Test Kit is used to rapidly detect canine adenovirus (CAV AG) antigen in canine nasal secretions.

【testing principle】

This product adopts the immunochromatographic gold standard double antibody sandwich detection technology, which can quickly, accurately and simply detect canine adenovirus (CAV) antigen in canine nasal secretions. With the minimum sample size required, results can be obtained in a short time (only 10-15 minutes). The test result on the test card contains the test line "T line" and the control line "C line". Before the sample was added, neither the "T-line" nor the "C-line" appeared. The "C line" is used to confirm that the sample has spread correctly on the test card. The "T-line" is used to confirm the presence of CAV antigen in the sample.

【 Package Specifications and components 】

Components Specification
1T/box 20T/box 25T/box
Reagent card 1 20 25
Diluent pipe 1 20 25
Instruction 1 1 1

Note:  according to the packaging specifications, other equipment can be purchased or contact the manufacturer.


【 Storage and expiration date 】

This kit is stored at 2-30℃; Do not freeze. Valid for 24 months; test kit After opening the bag, use the reagent as soon as possible.

[Sample requirements]

1. Test sample: dog excreta

2. Samples should be tested on the same day; Samples that cannot be tested on the same day should be stored at 2-8 ° C over For 24 hours, it should be stored at -20℃.

[Test method] Return unopened test card and sample to room temperature (20 ℃-25 ℃).Use a disposable sampling swab to take a sample from your dog's rectum or directly from fresh feces, dip it into a sample dilution tube (containing 0.5 ml of dilution buffer), mix well, and leave for 1 minute. The supernatant is the test solution. If the sample cannot be detected immediately, it should be refrigerated at 2-8 ° C. If more than 24 hours, should be frozen at -20 ℃ below.3, Place the test card horizontally, absorb the test solution with a pipette, and immediately add 3-4 drops (-100 μl) vertically above the sampling hole.4. Let the test card sit at room temperature for 10-15 minutes before reading the test results. If it takes more than 20 minutes, the test results are invalid.


【 Result interpretation 】

Positive: Both the quality control line (C line) and the test line (T line) appear

Negative: Only the quality control line (C line) is available

Invalid: Quality control line does not appear, take a new device to retest


【Precautions】  

1.   This product is only used for qualitative testing and does not indicate the virus level in the sample.

2.   Test results of this product are for reference only and should not be used as the sole basis for diagnosis and treatment, but should be made by a physician after evaluating all clinical and laboratory evidence.

3.   A negative result may occur if the viral antigen present in the sample is below the detection limit of the assay, or if the antigen detected at the disease stage at which the sample was collected is not present.

4.   The operation should be carried out in strict accordance with the instructions.   Do not use expired or damaged products.

5.   The test card should be used within 1 hour after opening;   If the ambient temperature is higher than 30 ° C or more humid, it should be used immediately.

6.   If the T line has just begun to show color, and then the line color gradually fades or even disappears, in this case, the sample should be diluted several times and tested until the T line color is stable.

7.   This product is a disposable product.   Do not reuse it.


Products Categorys

Featured Products

Navigation